INTERFACE CABLES Ordering Part Number Type Description Drawing Download CT10051 USB USB A to 5 pin header cable (CT10050 also required) CT10085 Serial DB-9 serial to 5 pin RS-232 header with extra breakout wires for 5V power supply (CT10050 also required) CT10052 Serial DB-9 serial to 5 pin RS-232 header with PS/2 connection for power supply (CT10050 also required) *Note the external power from main board or PS/2 interface is necessary when using serial interface only. EXTENSION CABLES Ordering Part Number Type Description Drawing Download CT10486 4-Wire 4-Wire jumper cable CT10154 5-Wire 5-Wire jumper cable C18-080S1F-080G1M 8-Wire 8-Wire multi-color ribbon cable extension.
Hi, I am using a Beetronics 15TS touchscreen monitor, which is based on eGalax technology. I am running it with a Compulab Fitlet-B at a resolution of 1024x768. I am having difficulties however in calibrating the touchscreen properly. OS is LinuxMint 18.1 XFCE edition. I have tried running xinput_calibrator, and adding the returned settings to the /usr/share/X11/xorg.conf.d/01-input.conf which makes the changes stick. However, the calibration is not being well done. The main problem I encounter is that there is a small skew in the touchscreen, meaning that a given position tapped with the stylus on the right side of the screen, places the cursor lower than a vertically identical position tapped on the left side of the screen.
Csa B149 Installation Codes. Touch screen trouble. The Archos 9 uses a touchscreen connected to a PS/2 port. State Emergency Game Pc. There are Linux drivers available (see unfortunately I could not get it working so far. The egalax X driver is loaded and the eGalaxTouch recognises it but no touch is being registered. Mouse trouble.
The skew is about one centimetre for the whole of the screen. Xinput_calibrator is not able to calibrate this - in fact I had to run it with the paramater '--misclick 0' in order to make it complete the calibration process. Is there any place where I can adjust the settings in order to compensate for this skew? Erd Commander For Windows 7 Iso Files.
Xinput_calibrator lists the following devices as available, but it is only when working with the second one (id=10) that the changes seem to take effect.